CAM OpActiveToggle/de
Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.
Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).
Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.
|
|
| Menu location |
|---|
| CAM → Toggle the Active State of the Operation |
| Workbenches |
| CAM |
| Default shortcut |
| P X |
| Introduced in version |
| - |
| See also |
| None |
Beschreibung
The 
Active tool in the 
CAM Workbench is used to toggle the active state of an existing path operation.
This tool can only be used if your 
Job has at least one path operation.
Anwendung
- Select an operation in the Operations group belonging to a Job. A deactivated operation can be recognized by its grayed out label and icon.
- There are several ways to invoke the command:
- Press the CAM OpActiveToggle button.
- Select the CAM → Toggle the Active State of the Operation option from the menu.
- Use the keyboard shortcut: P then X.
- Press the
- The result depends on the selected operation:
- If you have selected an active operation the command deactivates it:
- The operation icon is replaced with the command icon: .
- The operation icon and label are grayed out.
- The paths generated from the operation disappear from the 3D view.
- When using the
CAM Inspect command or the 
CAM Post command, the operation's G-code is not provided.
- The operation icon is replaced with the command icon:
- If you have selected a deactivated operation the command activates it:
- The operation icon is replaced with that belonging to the operation.
- The operation icon and label are no longer grayed out.
- The paths generated from the operation are recomputed and displayed in the 3D view.
- When using the CAM Inspect command or the CAM Post command, the operation's G-code is provided.
- If you have selected an active operation the command deactivates it:
Optionen
Empty
Eigenschaften
Empty
Skripten
See also: FreeCAD Scripting Basics.
Example:
#Place code example here.
CAM
- Project Commands: Job, Post Process, Check the CAM job for common errors, Export Template
- Tool Commands: Inspect CAM Commands, CAM Simulator, Finish Selecting Loop, Toggle the Active State of the Operation, ToolBit Library editor, ToolBit Dock
- Basic Operations: Profile, Pocket Shape, Drilling, Face, Helix, Adaptive, Slot, Engrave, Deburr, Vcarve
- 3D Operations: 3D Pocket, 3D Surface, Waterline
- CAM Modification: Copy the operation in the job, Array, Simple Copy
- Specialty Operations: Thread Milling
- Miscellaneous: Area, Area workplane
- ToolBit architecture: Tools, ToolShape, ToolBit, ToolBit Library, ToolController
- Additional: Preferences, Scripting
Anwenderdokumentation
- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzliche Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Voreinstellungseditor, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, FreeCAD unterstützen, Spenden
- Hilfe: Anleitungen, Videoanleitungen
- Arbeitsbereiche: Std Base, Arch, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework